Data as of Aug 16, 2026 · Based on 273 AI responses from ChatGPT Search and Google AI Mode · See how Parse measures this
You can freely mix brands like 
Brands AI recommends here
Best for console users needing to bridge third-party pedals with a Fanatec base. It enables cross-brand compatibility on PlayStation and Xbox, which is otherwise restricted without an adapter.
Best for providing power stability to high-drain racing peripherals on PC. Using a powered USB 3.0+ hub from this brand prevents data signal drops or power issues during intensive use.
HeusinkveldSource | Citation share |
|---|---|
Can I Use a Fanatec Wheel Base with Other Brands' Pedals? | Fanatechttps://www.fanatec.com/us/en/explorer/products/racing-wheels-wheel-bases/fanatec-wheel-base-with-other-brands-pedals/ | 8.2% |
Does the usb adapter allow fanatec pedals to be used with moza gear – Fanatec Supporthttps://help.fanatec.com/hc/en-us/articles/30312144101393-Does-the-usb-adapter-allow-fanatec-pedals-to-be-used-with-moza-gear | 4.1% |
Using Third-Party Pedals and Fanatec Hardware | Fanatechttps://www.fanatec.com/us/en/explorer/products/pedals/using-third-party-pedals-and-fanatec-hardware/ | 4.0% |
 How to Connect Third-Party Pedals to Fanatec, Logitech or Thrustmaster Wheel Bases – IGNI RACINGhttps://www.igniracing.com/blogs/pit-house/how-to-use-third-party-pedals-with-fanatec-or-thrustmaster-wheel-bases | 3.5% |
Can I use pedals from a different brand? - Fanatec Supporthttps://help.fanatec.com/hc/en-us/articles/30312128566801-Can-I-use-pedals-from-a-different-brand | 3.3% |
 Any wheel compatible with the Playstation5 (almost)https://www.youtube.com/watch | 2.9% |
How to use Fanatec & Heusinkveld on Playstation! ...https://www.youtube.com/watch | 2.1% |
Connect 3rd party pedals to Podium Racing Wheel F1® base?https://forum.fanatec.com/topic/7401-connect-3rd-party-pedals-to-podium-racing-wheel-f1%C2%AE-base/ | 1.9% |
 Does USB Hubs work with multiple signals at once? : r/simracinghttps://www.reddit.com/r/simracing/comments/1bv7z60/does_usb_hubs_work_with_multiple_signals_at_once/ | 1.9% |
Is it easy to use other brand's pedal on a fanatec wheel basehttps://www.reddit.com/r/simracing/comments/1l0tojd/is_it_easy_to_use_other_brands_pedal_on_a_fanatec/ | 1.8% |
Yes — you can absolutely mix and match brands, and Heusinkveld pedals + a Fanatec wheel base is a very good combination on PC.
The important part is how you connect them:
If you have enough motherboard USB ports, my first choice is actually no hub. Plug both the Fanatec base and Heusinkveld controller directly into the PC. Fanatec specifically recommends a direct motherboard connection rather than a USB hub when possible.
If you need a hub, I'd use a powered USB 3.0 hub rather than a cheap unpowered splitter.
The Sabrent 4-port powered USB 3.0 is a good simple choice. It's inexpensive, has its own power adapter, and gives you four USB 3.0 ports. Sabrent
For a more substantial cockpit setup, I'd consider:
That's useful if you're eventually running Heusinkveld pedals + shifter + handbrake + button box + other peripherals.
You don't need a special "Fanatec-to-Heusinkveld adapter." The pedals aren't supposed to communicate through the Fanatec base. The USB connection is the adapter/interface.
So your setup should look roughly like:
PC → USB → Fanatec wheel base → USB → Heusinkveld pedal controller → USB → other sim peripherals
Then in iRacing, Assetto Corsa, ACC, etc., you assign the Fanatec device for steering and the Heusinkveld device for throttle/brake/clutch.
If you're on PlayStation or Xbox rather than PC, that's a different story — the mixed-brand setup isn't officially supported the same way.
If you tell me which Fanatec base you have (DD, DD+, CSL DD, etc.) and which Heusinkveld pedals (Sprint, Ultimate+, Sim Pedals Pro, etc.), I can recommend the exact USB setup and hub I'd buy, including whether I'd put the Fanatec base itself on the hub.
Yes, you can mix and match sim racing brands on a PC without issue. However, you cannot plug Heusinkveld pedals directly into a Fanatec wheel base using a cable adapter ; Heusinkveld pedals must connect independently straight to your computer via their own USB controller. (Note: Mixing brands does not work natively on consoles like PlayStation or Xbox unless you use a signal-translating device like a Collective Minds DriveHub).
Connecting Your Setup on PC
Recommended USB Hubs
Because Heusinkveld pedals feature high-polling-rate controllers, they can occasionally stutter or disconnect if run through cheap, unpowered, or over-saturated USB splitters. If you need an expanded connection layout on your rig, use a robust, externally powered USB hub plugged directly into your PC:
| Hub Model | Type | Key Advantage |
|---|---|---|
| Anker 7-Port USB 3.0 Hub | Powered (with 36W adapter) | Highly stable power delivery for high-polling sim gear. |
| TP-Link 7-Port USB 3.0 Hub | Powered | Reliable data throughput and widely used in sim rigs. |
| Direct PC Motherboard Port | Direct connection | Best practice for the Heusinkveld USB controller to avoid latency. |
Are you playing strictly on PC , or are you trying to get this mix-and-match setup to function on a console (PS5/Xbox) ? If you are on PC, letting me know if you are experiencing any specific connection dropouts can help narrow down troubleshooting.
Yes — on PC, you can absolutely mix Fanatec and Heusinkveld. In fact, it’s a very good combination.
The important distinction is that you don't connect the Heusinkveld pedals to the Fanatec wheelbase. Fanatec explicitly says third-party pedals need their own USB connection to the PC.
Fanatec wheelbase ───── USB ───── PC
│
Heusinkveld pedals ── USB ── powered USB hub ── PC
The Heusinkveld controller connects to the PC by USB, and you calibrate it through Heusinkveld's software.
You do NOT need a special Fanatec-to-Heusinkveld adapter.
For a sim rig, I'd use a quality powered USB 3.x hub rather than a cheap passive hub. Something like a powered 7-port Plugable or Sabrent is a sensible choice if you need additional ports for a shifter, handbrake, button box, etc.
I'd actually do:
That keeps the wheelbase on its own USB connection while giving the pedals and other peripherals a stable powered connection.
If you're on PC, you're good.
If you're trying to use the Fanatec + Heusinkveld combination on PS5 or Xbox, it's a very different situation. Heusinkveld officially supports Windows PCs, not PlayStation/Xbox, and Fanatec doesn't officially support third-party pedals through the base.
If you tell me which Fanatec base you have (CSL DD, DD Pro, ClubSport DD, DD+, etc.) and which Heusinkveld pedals (Sprints or Ultimate+), I can tell you exactly which hub I'd buy and which USB ports I'd use for the most reliable setup.
Yes — if you’re on PC, you can absolutely mix Fanatec and Heusinkveld. In fact, that’s a very good combination.
The important part is that the pedals do not connect to the Fanatec wheelbase. Fanatec explicitly says third-party pedals need their own USB connection to the PC.
Fanatec wheelbase ───── USB ─────┐
├── PC
Heusinkveld pedals ── USB ───────┘
For the Heusinkvelds, use their included USB controller/cable and Heusinkveld SmartControl for calibration. Their documentation specifically calls for connecting the controller box to the PC via USB.
No, not for PC. You need a USB hub only if you don't have enough USB ports.
My preferred arrangement would be:
This is particularly sensible because Fanatec itself recommends a direct motherboard connection for the wheelbase when possible.
$69.05
$149.00
$69.16
Best value: Sabrent 7-port powered USB 3.0 hub. Individual switches are handy for troubleshooting and shutting off peripherals without unplugging them.
Best premium/sim-rig option: RealSimGear 10-port USB3 hub. It has a 60W power supply and is purpose-built around simulator peripherals.
If you're building a large cockpit: Nitro Concepts UH1 gives you 10 active ports and USB 3.2.
If you're talking about PlayStation or Xbox rather than PC, the answer changes substantially. Heusinkveld officially supports Windows PC, not PlayStation/Xbox, so a normal USB hub won't make the pedals work through a Fanatec base on console.
So if you're on PC, I'd go:
Fanatec base → motherboard USB
Heusinkveld → powered Sabrent/RealSimGear hub → motherboard USB
No special Fanatec adapter required.
If you tell me which Fanatec base (CSL DD, DD+, DD Pro, DD1, etc.) and which Heusinkveld pedals (Sprints, Ultimate+, etc.), I can give you the exact USB wiring I'd use and which ports to put everything on.
Can you mix and match brands?
Yes, absolutely—if you are on a PC. Virtually all modern racing simulators (like iRacing, Assetto Corsa Competizione, and Automobilista 2) treat separate USB devices as independent controllers. You can map your steering to the Fanatec base and your throttle/brake/clutch directly to the Heusinkveld pedals.
However, no, if you are on a console (PS5/Xbox) . Consoles do not natively process multiple individual USB controllers in the same way, requiring all inputs to route directly through an officially supported wheel base. To mix brands on a console, you would need an external translation device like a Collective Minds DriveHub Go to product viewer dialog for this item..
What is the best USB hub to use?
Because Heusinkveld pedals connect via their own dedicated USB controller box and your Fanatec base needs its own direct line to your computer, you will want a Powered USB Hub (one that plugs into the wall rather than relying purely on power from your computer's motherboard). High-end sim racing gear—especially Force Feedback direct drive wheels and load-cell pedals—can pull significant power and demand stable data transfer to avoid dropouts or phantom inputs.
Recommended, reliable powered USB hubs for sim racing include:
Features a sturdy build, a dedicated 12W power adapter, and plenty of ports to expand into shifters or handbrakes later.
Excellent metal construction that mounts easily to aluminum profile rigs and handles heavy data loads without latency.
Note: Avoid cheap, unpowered passive hubs. Connecting a Direct Drive base and load-cell pedals to an unpowered hub frequently leads to disconnects or erratic calibration.
Are you playing on a PC or a console (PS5/Xbox) , and do you plan to add any other mixed-brand gear (like a shifter or handbrake) to this setup?
Yes — if you’re on PC, mixing Heusinkveld pedals with a Fanatec wheel base is completely fine, and it’s actually a very common setup. Fanatec confirms that third-party pedals can be used on PC as long as they have their own USB connection.
I would not try to connect the Heusinkveld pedals to the Fanatec wheel base. Instead:
Fanatec wheel base → USB → PC
Heusinkveld pedals → USB → PC
Your sim sees the Fanatec base and Heusinkveld pedals as separate USB controllers.
If you have enough motherboard USB ports, this is my preferred setup. Fanatec itself recommends connecting its wheel base directly to a motherboard USB port rather than through a hub when possible.
For a cockpit with pedals + wheel + shifter + handbrake + button boxes, I'd use a powered USB 3.x hub rather than a passive hub.
A good sim-rig-oriented option currently available is the Nitro Concepts UH1 10-port powered hub:
$69.35
But there's an important distinction:
And you don't need a special Fanatec-to-Heusinkveld adapter. Heusinkveld pedals are already USB devices, so the USB hub is simply providing another path to the PC.
If you're talking about PS5/Xbox rather than PC, the answer changes dramatically. Fanatec says third-party pedals aren't supported by simply plugging them into the Fanatec base on console; the PC is where you get the freedom to mix brands.
If you tell me which Fanatec base you have (CSL DD, DD Pro, DD+, DD1/DD2, etc.) and which Heusinkveld pedals (Sprint, Ultimate+, etc.), I can recommend the exact USB connection/hub setup I'd use for your rig.
Yes, you can completely mix and match brands —as long as you are playing on a PC.
On PC, modern racing simulators (like iRacing, Assetto Corsa Competizione, and Automobilista 2) treat each piece of hardware as a separate independent USB input device. You simply plug your Fanatec wheelbase into one USB port and your Heusinkveld pedals into another, then map them separately in your game's control settings.
(Note: If you are on a PlayStation or Xbox console, mixing and matching brands natively is not supported because consoles require all inputs to route through the official wheelbase. Bypassing this requires a specialized external translation device like a Collective Minds DriveHub , which can be finicky).
Do you need an adapter or special USB hub?
If you'd like, tell me:
Yes—if you're on PC, you can absolutely mix and match brands. In fact, a Fanatec wheelbase + Heusinkveld pedals is one of the most popular enthusiast combinations.
The important point is that Heusinkveld pedals do not plug into the Fanatec wheelbase. Instead:
Windows and your sim (iRacing, Assetto Corsa Competizione, AMS2, rFactor 2, etc.) will see them as separate controllers. You'll calibrate the wheel in Fanatec software and the pedals in Heusinkveld SmartControl. Fanatec also states that third-party pedals must be connected directly to the PC, not the wheelbase.
No. You do not need a special adapter for PC. You just need an available USB port.
If you're running several peripherals, a powered USB hub is a good idea.
If you're building a permanent sim rig, I'd buy a powered hub rather than a simple splitter.
Best overall:
$44.99
Why it's a great choice:
Other good options:
$27.99
$69.99
For maximum reliability:
Keeping the wheelbase on its own USB port minimizes the chance of disconnects, while the pedals and other peripherals typically work perfectly through a quality powered hub. Community reports mirror this setup and generally find it very reliable.
One question: Are you on PC or PlayStation/Xbox? The answer is different for consoles, where cross-brand pedal support is much more limited.
Can I mix and match brands?
Yes, absolutely—if you are on PC . Modern PC racing sims (like iRacing, Assetto Corsa Competizione, and Automobilista 2) treat each piece of hardware as an independent USB game controller . You can run a Fanatec wheelbase, Heusinkveld pedals, and a Thrustmaster or Moza shifter all at the same time without issue.
No, not natively—if you are on a console (PS5/Xbox). Consoles generally require all peripheral inputs to route directly through the official wheelbase. To mix brands on a console, you have to use a hardware translation device like a DriveHub by Collective Minds Go to product viewer dialog for this item..
How to connect Heusinkveld pedals to a Fanatec base
You cannot plug Heusinkveld pedals directly into a Fanatec wheelbase. Fanatec bases only accept proprietary RJ12 connections from Fanatec's own ecosystem. Heusinkveld pedals use their own dedicated USB controller box and must connect independently via USB.
Because of this, you do not plug your Heusinkveld pedals into the Fanatec base. Instead, both the Fanatec base and the Heusinkveld USB controller plug into your PC (or into a USB hub attached to your PC) separately.
What is the best USB hub or adapter to use?
If you are running out of motherboard USB ports or want to manage cable clutter cleanly on your rig, you should use a powered USB hub:
1. **[Anker 7-Port USB 3.0 Data Hub Go to product viewer dialog for this item.](https://www.google.com/search?ibp=oshop&prds=pvt:hg,pvo:29,mid:576462523924728935,imageDocid:6941432135289046706,gpcid:15576014342086732721,headlineOfferDocid:11851364381784829258,catalogid:14924970312198541120,productDocid:10600267989337763482,rds:PC_15576014342086732721%7CPROD_PC_15576014342086732721&q=product&sa=X&ved=2ahUKEwjestTRyYuWAxU8g_0HHd8qDDkQxa4PeggIAggBCB4QCQ)** : Comes with a robust 36W power adapter, providing plenty of stable current for multiple high-polling-rate sim racing peripherals.
1. **[Sabrent 10-Port or 4-Port USB 3.0 Hub with Individual Power Switches Go to product viewer dialog for this item.](https://www.google.com/search?ibp=oshop&prds=pvt:hg,pvo:29,mid:576462300313863302,imageDocid:7694257333126805226,gpcid:2149513576411706713,headlineOfferDocid:14698354459603784827,catalogid:18363952253652731964,productDocid:9584621304438009372,rds:PC_2149513576411706713%7CPROD_PC_2149513576411706713&q=product&sa=X&ved=2ahUKEwjestTRyYuWAxU8g_0HHd8qDDkQxa4PeggIAggBCB4QDQ)** : A staple in the sim racing community for managing multiple separate USB controllers, allowing you to cycle power to individual devices easily.
Are you playing strictly on PC or trying to get this working on a console (PS5/Xbox) ? If you're on PC, let me know if you are looking for a desktop hub or something to mount directly to your aluminum profile rig.
Yes—on PC, mixing brands is completely normal and is one of the most common high-end sim racing setups. A Fanatec wheelbase paired with Heusinkveld pedals works very well.
The important thing is this:
You do not plug Heusinkveld pedals into the Fanatec wheelbase's pedal port. Fanatec explicitly states that third-party pedals must connect directly to the PC via USB.
If you're on PlayStation or Xbox, it's a different story. Consoles generally don't support mixing USB controllers this way, so you would need a compatibility adapter such as a Drive Hub (and compatibility depends on the specific console and game).
If your motherboard has enough USB ports, plugging both devices directly into the motherboard is the best option.
If you need more ports or want cleaner cable management, a powered USB 3.0 hub is the better choice. Powered hubs tend to provide more stable connections when you have several sim racing peripherals (wheelbase, pedals, shifter, button box, handbrake, etc.) connected simultaneously.
If you only need a few extra ports:
$44.99
This is a popular choice because it includes its own power supply and gives you room to expand your rig.
If you expect your sim rig to grow:
$49.99
Ten ports leave plenty of room for pedals, wheel, shifter, handbrake, button box, bass shakers, and future accessories.
For a premium industrial-style hub:
$79.00
This is designed with simulation setups in mind and includes a substantial external power supply.
If you're building a higher-end rig, I'd also recommend putting all low-bandwidth devices (pedals, shifter, button box, handbrake) on the powered hub and leaving the wheelbase connected directly to a motherboard USB port. It's not strictly required, but it's a common configuration that minimizes variables if you ever need to troubleshoot USB disconnects.
