I want a summarizer that provides bullet points and does not miss numerical data.

• Bullet-point format ensures that the summary is clean, scannable, and organized at a glance.
• Numerical preservation guarantees that every important statistic, percentage, date, dollar amount, and quantitative figure from the source text is accurately retained using proper mathematical and numerical formatting (e.g., $50, 45%, 100).
• Direct extraction focuses on core insights without sacrificing data integrity or context.

If you paste the text or article you want summarized, I will generate the bulleted summary for you right away while keeping all the numbers intact.

Absolutely. I’d design it as a bullet-point summarizer with strict numerical preservation.

Recommended summarizer behavior

• Use bullet points organized by topic or section.
• Preserve every meaningful number from the source: - Dates and years
• Percentages
• Amounts and currencies
• Counts and sample sizes
• Measurements and units
• Statistics, ratios, ranges, and scores
• Page/section references when relevant
• Never round or approximate a number unless the source itself does.
• Keep numbers with their units and context — e.g., 37.6°C, not just 37.6.
• Do not invent calculations or numbers.
• Distinguish source numbers from derived numbers. If a calculation is necessary, label it as derived.
• Preserve comparisons and baselines, since a percentage or difference can be misleading without its reference value.
• For long documents, summarize section-by-section first, then consolidate the results so important details aren't lost through repeated compression.
• Perform a final numerical check against the source before producing the summary.

A strong prompt for it

Summarize the following text in concise bullet points.

Critical requirement: do not omit numerical information.

• Preserve every meaningful numerical value in the source, including dates, percentages, monetary amounts, quantities, measurements, ranges, ratios, statistics, sample sizes, scores, and counts.
• Preserve numbers exactly as stated, including decimal places, signs, units, currencies, and %.
• Do not replace exact numbers with approximations such as “about 50” when the source says “47.”
• Keep each number attached to the fact or claim it describes.
• Preserve important comparisons, baselines, increases/decreases, and numerical relationships.
• Do not invent facts, numbers, calculations, or interpretations.
• If you calculate a number yourself, clearly label it “Derived:” and show the calculation.
• Organize the output into logical bullet points with concise wording.
• After summarizing, perform a numerical completeness check and make sure no important number from the source was accidentally omitted.

Output only the bullet-point summary and, if needed, a final “Numerical check” section. This approach is particularly important because ordinary summarization can lose exact figures during compression; research on numerical summarization specifically identifies preservation of numerals as a challenge.

If you give me a document or passage, I can use this number-preserving bullet format directly.

I can help you build or write a summarizer that captures all your critical numbers. To set this up effectively, tell me:

• Where you want to run this summarizer (e.g., a Python script, an LLM prompt, or a dedicated tool)
• The type of text you usually summarize (financial reports, research papers, news articles)
• Whether you want the numbers highlighted in a specific way (like bolding every N or % metric)

If you share a sample text or paste it here, I can immediately run a test summary for you to see how it handles the numerical data.

Yes. For your requirement, I’d use a numbers-first bullet summarizer rather than a generic TL;DR tool. Numerical information is one of the details summarizers commonly drop, so explicitly prioritizing it matters.

Good options

• scispace.com — Best fit if you summarize research papers, PDFs, or technical documents. It specifically emphasizes numbers, effect sizes, limitations, citations, and source/page provenance.
• write-humanly.com — Simple bullet-mode summarization, with PDF/Word support on its dashboard.
• 7busyboss.com — Explicitly advertises preserving facts, names, and numbers and has a bullet format.

If you want my summarizer behavior

Paste the text here and I can follow this format:

• Main point: …
• Key finding: $4.2M, up 12% YoY
• Important dates: March 2026, Q3 2026
• Statistics: 37%, 2.4×, 1,250 participants
• Other key facts: …
• Caveats/limitations: …

Rule: I’ll preserve every meaningful number, percentage, date, currency amount, measurement, ratio, sample size, and quantitative comparison from the source rather than silently dropping them. I’ll also avoid inventing numbers that aren't in the source.

Here is a bullet-point summarizer designed specifically to extract and highlight all critical numerical data , statistics, metrics, and quantitative facts without leaving anything behind.

• Data Preservation - Every statistic, percentage, dollar amount, date, dimension, and count is explicitly captured and paired with its context.
• Structure - Clear, scannable bullet points categorized logically so you can grasp the quantitative core of any text at a glance.
• Accuracy - Zero extrapolation or estimated figures; strictly bound to the source text provided.

To get started, please paste the text or article you would like me to summarize, and I will extract all the key points and numerical data for you right away.

Absolutely. A good summarizer for your use case should prioritize numerical fidelity over aggressive compression. Research on bullet-point summarization specifically treats preserving numerical values as an important accuracy problem.

Use this as the summarizer instruction:

Summarize the following text into concise bullet points.

• Capture the most important facts, conclusions, decisions, and action items.
• Do not omit numerical data. Preserve all important numbers, percentages, dates, dollar amounts, quantities, measurements, ranges, ratios, sample sizes, and statistical values.
• Keep numerical values exactly as stated, including units, currency symbols, decimal places, and signs.
• Do not round, estimate, convert, or reinterpret numbers.
• Preserve comparisons such as “increased from 42% to 57%” rather than reducing them to “increased.”
• Preserve conditions, exceptions, caveats, and uncertainty attached to numerical claims.
• If two numbers conflict, include both and flag the discrepancy rather than choosing one.
• Do not invent information or infer numbers that are not explicitly supported by the source.
• Use one distinct idea per bullet and avoid unnecessary repetition.
• Organize bullets in order of importance.
• If the source is long, summarize section by section first, then consolidate the results so numerical details are not lost.

Output format:

• Key Point: concise explanation with relevant numbers.
• Key Point: concise explanation with relevant numbers.
• Key Point: concise explanation with relevant numbers.

Final verification: Before responding, compare the summary against the source and check that every important numerical figure has been retained accurately.

For especially data-heavy documents, I'd add a “Numbers & Data” section after the main bullets. That gives you a second, explicit place to verify figures rather than relying solely on the prose bullets. Structured prompts and explicit preservation rules generally make summarization more consistent.

Absolutely. I can act as a numerically faithful bullet-point summarizer.

I’ll use these rules:

• Bullet points first: Clear, concise bullets rather than long paragraphs.
• Preserve numerical data: Keep all important numbers, percentages, dates, dollar amounts, measurements, counts, ranges, and ratios from the source.
• No number-changing: I won’t round, reinterpret, or silently convert figures.
• Keep context: Attach each number to what it measures so figures aren’t misleading.
• Preserve uncertainty: Keep qualifiers such as “approximately,” “estimated,” “up to,” or “±” when present.
• No invention: If something is unclear or missing, I’ll say so rather than guess.
• Prioritize signal: Remove repetition and filler while retaining decisions, findings, exceptions, risks, and important details.
• Cross-check figures: I’ll pay particular attention to whether percentages, totals, dates, and units remain consistent.
• Organize when useful: For dense material, I can separate Key Points, Numbers & Metrics, Decisions, Risks, and Action Items.

For example, you can simply paste text and say “Summarize this”. I’ll return the bullet-point summary without requiring a special prompt.

Got it. Paste the text, data, or article you want summarized, and I will extract the key takeaways into a clean bulleted list while making sure every piece of numerical data, statistic, or percentage is fully captured.

Please share the text or document you want me to summarize.

You can paste or provide your text right here, and this assistant will summarize it using strict bullet points while explicitly retaining all numbers, statistics, percentages, and data values. If you prefer using a dedicated online application for your workflow, you can try general tools like Grammarly AI Summarizing Tool, Quillbot AI Text Summarizer , or Scribbr Free Text Summarizer which offer bullet-point output formatting.

How to Proceed

• Paste the text, article, or notes you want summarized directly into our chat.
• Specify if you want a concise or detailed breakdown.

Would you like to paste your text now so I can generate your bullet-point summary with all numerical data intact?

Absolutely. I can summarize material using a numbers-first, bullet-point format.

My default approach will be:

• Key points: concise bullets focused on the most important information
• Numerical data: preserve every meaningful number, including percentages, dollar amounts, dates, quantities, ranges, ratios, and statistics
• Comparisons: keep the original figures and clearly indicate increases/decreases
• Names & terms: preserve important proper nouns, technical terms, and labels
• Context: retain the conditions or qualifiers needed to interpret a number correctly
• No invention: I won't infer or fabricate missing figures; ambiguous information will be flagged
• Conciseness: remove repetition and filler while retaining substantive details

This is consistent with summarization guidance that specifically recommends preserving exact numbers, dates, and other factual details, while using bullets for scannable presentation.

Send me the text, document, article, or transcript you want summarized.